newsxy.in

ZigBee testing


The ZigBee Manufacturing test solution takes not more than 2-3 seconds to perform all the RF tests, which includes various Transmitter and Receiver tests and giving out detailed tests reports. The solution is capable of testing multiple DUTs in parallel.
It includes
PCBA Tests
Voltage & Current Testing
RF Tests (Transmitter Tests)
Transmit Power
PSD (Power Spectral Density ) Mask
CFO ( Center Frequency Tolerance)
EVM ( Error Vector Magnitude)
Carrier Suppression
Ramp Up / Down
Phase Noise
Phase Lock Loop (PLL) Convergence
Tx / Rx Turnaround Time
RF Tests (Receiver Tests)
Receiver Sensitivity
Receiver Maximum Input Power
Receiver Adjacent Channel Rejection
Receiver Alternate Channel Rejection
ZigBee is a Wireless Personal Area Network (WPAN) that follows the research 802.15.4 standard and is promoted by the ZigBee Alliance. research 802.15.4 operates in two separate frequency ranges: 868/915 MHz and 2.4 GHz. The lower frequency covers both the 868 MHz European band and the 915 MHz band that is used in countries such as the United States and Australia. The higher frequency is used virtually worldwide. The ZigBee Alliance is an association of companies working together to enable reliable, cost-effective, low-power, wirelessly networked, monitoring and control products based on an open global standard.

More details